High Position Gripper High Level Palletizer SPRS-GM 13KW

This machine is composed of an electrical control system and mechanical equipment together. The electrical control system is automatically controlled
Control and coordinate the actions of the palletizing system mechanism equipment to ensure that the palletizing machine completes the stacking according to the set process shape
Complete the entire palletizing process. The palletizing process is as follows:
The filled bags pass through the inverted bag conveyor, the incline conveyor and other conveyors and enter the flattening and vibration flattening transportation
After the material bags are leveled by the flattening and vibrating conveyor, they enter the grasping conveyor and are grasped by the palletizing machine
The picking mechanism automatically places the bag picking codes at the corresponding positions on the tray according to the set process. When one layer is neatly stacked
At that time, the elevator automatically lowers the height of one layer of material bags, that is, one layer is stacked. Stack them in sequence until set
The fixed layer (set in advance by the user, such as 6 layers or 10 layers) is one stack. After this stack is stacked, the elevator will be lifted
It is automatically lowered to the lowest position and automatically conveyed to the A and B pallet conveyors for stacking, and finally sent out by the forks
The vehicle is transported away.

Description of the double workstations for A and B stacks of this machine: Facing the direction of the palletizer, the left side is Stack A and the right side is Stack B.
Both Stack A and Stack B are equipped with ready buttons. Clicking the ready button on Stack A indicates that Stack A can proceed
Palletizing: Clicking the "B Stack Ready" button indicates that B stack is ready for palletizing. Remove the stack when it is fully stacked
At this time, the ready button of this stack automatically resets. When Stack A starts stacking, click "Stack B Ready", and Stack B will automatically enter the standby position. When Stack A is completed and removed from the stack, Stack B automatically enters the stack
Area palletizing. At this point, after the forklift operator lifts stack A away and clicks the "Stack A Ready" button, Stack A automatically enters the standby position. When Stack B is fully stacked and removed from the stack, Stack A automatically enters the palletizing area for stacking. If
After the forklift operator lifted stack A away and did not press the ready button for Stack A, Stack A was in A stopped state. When Stack B was fully stacked and removed from the stack, Stack A would not enter the palletizing area for stacking. At this point, the palletizer enters standby mode
The status and standby information are transmitted to the automatic packaging machine, and the automatic packaging machine also enters the standby state. Until the forklift operator presses the ready button for Stack A or B again. The palletizer automatically enters the stack again
Stack status and automatically transmit the information to the automatic packaging machine. The automatic packaging machine starts to work. The automatic packaging machine and the automatic palletizing machine are interlocked and associated. When one party stops, the other party also stops automatically
Stop. When one party runs, the other party runs automatically as well.